Out of several steps recommended in terms of roof maintenance, one is painting it after a certain period of time. But painting is something that we cannot start through DIY and we will definitely require that services of a Sydney roofing company seeing the size of the area. There are a number of steps to take before painting could be started and here in this post, we will have a look at some of them.
Cleaning the area
• When it comes to cleaning, some part of the task can be definitely done through DIY and the equipment used would depend upon your budget.
• You can use anything from a broom to a vacuum cleaner to blower vac depending upon the size, the amount of dirt present there and then, your budget.
• In this regards, experts from Colorbond roofing company Sydney say that using a high pressure water blaster is one of the best ways to clean a roof.
• This happens to be a perfect alternative for roofs that have a rough surface and otherwise you can even go with broom and a hose with some cleaning solutions to clean stubborn dirt and dust.
• According to the experts of Sydney roofing company, if the roof has a smooth surface such as galvanised iron, your washing would become easy, but some extra care has to be taken too.
How to Paint a Corrugated Iron Roof?
The first thing to know is that you should not estimate it as a task that can be completed through DIY and this means calling a Colorbond roof company Sydney experts is a must.
Steps for painting a roof:
• You will first have to wash it with a degreaser
• Then, you will need to prime it with a suitable primer
• You will need to apply two coats of suitable paint and the choice of colour is up to you
• Airless spraying is the quickest way to paint any roof
• When you are spraying, you should spray about a meter wide section
• Work your way down the sheet, spray in the direction of the flutes in the iron
• You must keep a wet edge at all times
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.